Eastops 8 port central unit with acrylic phone display stand holder
Specification:
- Product Name: 8-Port Alarm Controller
- Model Number: M802
- Working Temperature: -10°C-85°C
- Input: AC110V~240V 50~60Hz
- MCU: TI ( Texas Instruments )
- Alarming: 120dB
- Support a Buzzer to Place on desktop
- Output of Each Port: Support 2A
Operation Guide:
- 1. Charge for the host with power adapter connected.
- One end of power adapter plunging into DC Power Charge Port, the other end of power adapter plunging into power socket.
- Turn on power switch by pressing “red button” on back of host.
- Press Reset button and within 3 seconds press on remote controller.
- “D...D” sound indicates remote controller matches code successfully. Note: Keep pressing button on remote controller for 2 seconds.
- Plug USB end of sensor cable into cell phone.
- Tear off 3M sticker adhesive on small touch sensor.
- Pull straight and stick small touch sensor on back of cell phone (Keep pressing for 10 seconds).
- USB 2.0 of sensor cable plugged into port of host. “D” sound indicates being activated.
- Clearing code function is beneficial when remote controller is lost, this function prevents remote controller from being used by others.
- Match code with the one which lost its remote controller by using 3 remote controllers, then codes being matched before are cleared.
- One remote controller can clear all codes by matching 3 codes (3 times).
- Please connect power adapter to charge for host when displayed commodities need to be charged.
- Maximum number of remote controllers which can be used to matched code for one host is 3. Any one of these 3 remote controllers can cancel alarming of this host.